Adjusting Color - Canon imagePROGRAF iPF750 User Manual

Preview
Color Adjustment
You can set the color adjustment.

Adjusting Color

Normally colors should be adjusted in the software application, but if you see colors in the printout that do
not match colors on the screen, you can perform color adjustments.
1.
Select "Color" on "Color Mode" in the Color Settings panel.
2.
Select "Color Adjustment".
3.
Drag each slider to the left or right to adjust.
"Cyan"
"Magenta"
"Yellow"
"Brightness"
"Contrast"
"Saturation"
"Gray Tone"
Note
•
You can also click the up or down arrow, or enter the number directly to increase or decrease the
value.
488 Mac OS X Software
Setting
Adjusts the strength of colors to compensate the hues.
Adjusts the strength of colors to compensate the hues.
Adjusts the strength of colors to compensate the hues.
Adjusts the brightness of the entire image. When the results of the
printout are brighter than the original images such as the original photo
before scanning and graphics created on the display, or when you want
to print in different degrees of brightness, use this feature.
Adjusts the relative brightness between the brightest and darkest
portions of the image.
*For soft gradation, decrease the contrast. For hard gradation, increase
the contrast.
Adjusts the hues for vivid color or dark color.
Adjusts gray from cool black (bluish tones) to warm black (reddish tones).
Details