Hp-Gl/2 Problems; With Hp-Gl/2, Printing Is Misaligned - Canon imagePROGRAF iPF750 User Manual

Canon imageprograf ipf750: install guide
Hide thumbs Also See for imagePROGRAF iPF750:
Table of Contents

Advertisement

HP-GL/2 problems

HP-GL/2 problems

With HP-GL/2, printing is misaligned

The plotter origin is incorrect.
The Margin setting in the Control Panel menu is
incorrect.
Lines or images are missing in printed HP-GL/2 jobs.
The memory is full.
An HP-GL/2 command not supported by this printer
was received.
The printer has received print data that includes HP
RTL commands when Auto Rotate is On in the
Control Panel menu.
Lines are printed too thick or thin in HP-GL/2 print jobs
The Width setting in the Control Panel menu is
incorrect.
HP-GL/2 jobs are printed in monochrome (or color)
The Color Mode setting in the Control Panel menu
is incorrect.
Printed colors of lines are inaccurate during HP-GL/2
printing
AdjustFaintLines is On in the Control Panel menu.
682 Troubleshooting
Cause
Cause
Cause
Cause
Cause
Corrective Action
Check the printing commands.
Adjust the Margin setting values in the Control Panel
menu.
Corrective Action
Check the size of the data in the print job.
Check the print job and settings.
In the Control Panel, set Auto Rotate to Off and
print again.
(→P.49)
Corrective Action
Check the Width setting value specied for Pen
no. in Palette A or Palette B in the Control
Panel menu. If ne lines are printed faintly, setting
ThickenFineLines to On will print the lines more
distinctly.
(→P.49)
Corrective Action
Check the Color Mode setting in the Control Panel
menu.
(→P.49)
However, for optimal Printhead performance, the
printer consumes trace amounts of color ink even
when Monochrome is selected as Color Mode.
Corrective Action
Setting AdjustFaintLines to Off in the Control
Panel menu may help produce the expected results.
However, lines in some colors may appear broken.

Advertisement

Table of Contents
loading

This manual is also suitable for:

2983b007

Table of Contents