Messages regarding printheads
No printhead
No Printhead is installed.
Execute printhead cleaning.
The Printhead nozzles are clogged.
708 Error Message
Cause
Cause
Corrective Action
Install the Printhead.
(→P.633)
Corrective Action
Follow these steps to clean the Printhead.
1.
Stop printing by pressing ▲ or ▼ to select Stop
Printing.
2.
Clean the Printhead.
(→P.632)
If this message is still displayed, replace the
Printhead.
(→P.633)
Press ▲ or ▼ to select Print, and then press the OK
button to resume printing. However, note that this
error may affect the printing quality.
If OK is shown on the Display Screen, clean the
Printhead.
1.
Press the OK button on the Control Panel to stop
printing.
2.
Clean the Printhead.
(→P.632)
If this message is still displayed, replace the
Printhead.
(→P.633)