Canon imagePROGRAF iPF750 User Manual page 147

Manual (when using media that cannot be cut with the Cutter Unit)
1.
On the Tab Selection screen of the Control Panel, press ◄ or ► to select the Paper tab (
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2.
Press the OK button. The Paper Menu is displayed.
3.
Press ▲ or ▼ to select Paper Details, and then press the OK button.
4.
Press ▲ or ▼ to select the type of paper, and then press the OK button.
5.
Press ▲ or ▼ to select Cutting Mode, and then press the OK button.
6.
Press ▲ or ▼ to select Manual, and then press the OK button.
7.
Starts printing.
The printer stops advancing the paper after printing.
8.
Press the Feed button.
Roll paper is fed to the specied cut position and then automatically stopped.
9.
Cut the roll paper manually with scissors or the like.
Handling rolls
).
Handling Paper 131