Paper Jam; Push The Release Lever Back - Canon imagePROGRAF iPF750 User Manual

Paper jam

Push the release lever back.

A paper jam occurred in the printer during printing.
Manually rewind the roll all the way and press OK.
A paper jam occurred when advancing the paper.
Cause
Cause
Corrective Action
1.
Push the Release Lever back and remove the
jammed paper.
(→P.120)
(→P.145)
2.
Load the paper.
3.
Pull the Release Lever forward.
4.
If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
(→P.106)
(→P.136)
Corrective Action
1.
Rewind paper on the Roll Holder manually, all the
way, and then press the OK button.
2.
Load the paper.
3.
If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
(→P.106)
Messages regarding paper
Error Message 697