Handling rolls
10.
Press the OK button.
After the roll is rewound, it stops automatically.
Paper cutting (to have the roll cut at your specied position)
1.
Press the Feed button.
2.
Press the ▼ button to advance the roll to the position for cutting.
3.
Press the Cut button.
4.
Press ▲ or ▼ to select Yes, and then press the OK button.
After the roll paper is cut, it is rewound automatically.
Caution
•
If paper would be short when cut at a particular position, the roll may automatically be advanced in
some cases before cutting.
132 Handling Paper