Mode Transition - Canon imagePROGRAF iPF750 User Manual

Control Panel

Mode transition

•
Mode display
The printer mode is indicated as follows.
*1: The printer automatically enters Sleep mode when idle for a specic period (by default, ve
minutes), that is, if no print jobs are received or buttons are pressed while all covers are closed.
However, it does not enter Sleep mode while error messages are displayed.
*2: In Sleep mode, any button can be pressed except the Power button to recover from Sleep mode.
Sleep mode is also terminated if a print job is received or a command is issued from RemoteUI.
•
Error display
Mode transition during error display is as follows.
If multiple errors occur, tabs related to errors other than the error currently shown ash. Press the ◄
or ► button to access other tabs and check those errors. If multiple errors occur that are related to
the Job tab and Settings/Adj. tab, each error message is displayed for 4 seconds on each tab before
another message is shown.
28 Printer Parts