Handling rolls
Clearing Jammed Roll Paper
If paper from a roll becomes jammed, Paper jam. is shown on the Display Screen of the Control Panel.
Remove the jammed paper as follows.
1.
Open the Roll Cover. Use a commercially available cutter or the like to cut the paper of the
loaded roll.
Caution
•
When cutting paper, be careful to avoid injury or damage to the printer.
2.
Push the Release Lever back.
3.
Remove the jammed paper.
•
If paper is jammed inside the Top Cover
1.
Open the Top Cover and move the Carriage to the left or right side manually, away from the jam.
2.
Clear any jammed paper from inside the Top Cover.
After removing the paper, make sure there are no other scraps of paper in the printer.
120 Handling Paper
Need help?
Do you have a question about the imagePROGRAF iPF750 and is the answer not in the manual?
Questions and answers
scanning quality has deteriorated