Specifying The Cutting Method For Rolls - Canon imagePROGRAF iPF750 User Manual

Canon imageprograf ipf750: install guide

Hide thumbs Also See for imagePROGRAF iPF750:

Table of Contents

Specifying the Cutting Method for Rolls

How rolls are cut after ejection varies depending on printer settings.

Cutting Method

The roll is automatically cut by the Cutter

Unit following printer driver settings.

Choose this setting if you prefer not to

have documents dropped immediately after

printing, as when waiting for ink to dry.

To cut the roll with the Cutter Unit, press the

Choose this setting when using media that

cannot be cut using the Cutter Unit.

Cut each page from the roll using scissors.

For continuous printing (if you will cut each

page later), select Auto Cut > Yes or select

Print Cut Guideline.

Choose this option if you want to cut pages

by pressing Cutter Unit buttons for manual

cutting after printing when Auto Cut > No is

selected or Print Cut Guideline is selected

in the printer driver.

Otherwise choose this option if you want to

cut the roll edge after loading a roll.

Automatic and Eject are valid only when you have selected Auto Cut > Yes in the printer driver.

With Eject, printing does not resume after a series of jobs have been printed continuously until the

roll is cut.

Eject is the preset selection in Cutting Mode for some types of paper. For this paper, we recommend

keeping the preset cutting mode.

Cut rolls manually in the following cases:

Printer Setting

Handling rolls

Driver Setting

Handling Paper 129