When Using An Ipv4 Ip Address - Canon imagePROGRAF iPF750 User Manual

Network Setting
Conguring the Printer's TCP/IP Network Settings
Follow the steps below to congure the TCP/IP network settings.

When using an IPv4 IP address

1.
Start the web browser and enter the following URL in the Location (or Address) box to display
the RemoteUI page.
http://"printer IP address or name"/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4.
Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the TCP/IPv4 group to display the Edit TCP/IP Protocol
Settings page.
6.
Refer to the TCP/IP Settings Items table to complete the settings.
TCP/IP Settings Items
Use DHCP
Use BOOTP
Use RARP
Enable DNS Dynamic Update
Use Zeroconf Function
IP Address
Subnet Mask
Gateway Address
LPD Printing
IPP Printing
IPP Printer URI
RAW Printing
RAW Mode Bi-direction
FTP Printing
Use Discovery
Scope
570 Network Setting
Item
Activate this setting to use DHCP for
conguring the IP address.
Activate this setting to use BOOTP for
conguring the IP address.
Activate this setting to use RARP for
conguring the IP address.
Activate this setting to perform DNS
server registration automatically.
Activate this setting to use Bonjour.
Specify the printer's IP address.
Specify the printer's subnet mask.
Specify the printer's default gateway.
Activate this setting to use LDP Printing. On
Activate this setting to use IPP Printing. On
Specify the URI of the printer used for
IPP printing using up to 252 characters.
When using a standard Windows port for
IPP printing, enter an URL which should
not exceed 255 bytes for all characters
for "http://"IP address"/IPP-URI."
Activate this setting to use Raw Printing. On
Activate this setting to use Raw mode
bidirectional communication.
Activate this setting to use FTP Printing. On
Activate this setting to use Discovery.
Enter the search range.
Details
Default Setting
Off
Off
Off
Off
On
0.0.0.0
0.0.0.0
0.0.0.0
printer
Off
On
default