Incoming Ring - Canon MF247dw User Manual

● Even when ECM is enabled, errors may occur due to telephone line conditions.
● It may take a longer time than usual to process data when ECM is enabled because the error check
and corrections are performed while the data is transmitted.
<Menu> <Fax Settings>

Incoming Ring

Specify settings for sounding a ring to notify you of incoming faxes. This feature is only available when <Auto>
or <Fax/Tel (Auto Switch)> is selected for the receive mode. Specify how many times the incoming call rings
when the machine receives a fax call. You can also disable the settings to prevent the incoming call from
ringing.
Off
On
1 to 2 to 99 (times)
If you use this feature in the <Auto> mode, you need to connect your telephone to the machine
beforehand.
<Menu> <Fax Settings>
many times the incoming call rings
Remote RX
Specify settings for receiving a fax by operating a telephone that is connected to the machine (Remote
Reception). When a fax is sent to the machine, you can receive it just by picking up the handset of the telephone
and entering a specific ID number by using the telephone. This feature can save you the trouble of going all the
way to the machine. For instructions on how to use Remote Reception, see
Faxes (Remote Reception)(P. 144) .
Off
On
00 to 25 to 99
<Menu> <Fax Settings>
number for receiving a fax
Setting Menu List
<RX Function Settings>
<RX Function Settings>
<Apply>
<RX Function Settings>
<Apply>
504
<ECM RX> <On>
<Incoming Ring> <On>
Using a Telephone to Receive
<Remote RX> <On> Specify the ID
Specify how