Using The Scan Key (For Usb Users) - Brother DCP-9040CN Software User's Manual

Using the Scan key
(For USB users)
Note
If you use the Scan key when connected on a network, see Network Scanning on page 92.
You can use (Scan) on the control panel to scan documents into your word processing, graphics or
E-mail applications or a folder on your PC.
Before you can use
connect the machine to your PC. If you installed the MFL-Pro Suite from the included CD-ROM then the
correct drivers and ControlCenter3 are installed. Scanning by
Device Button tab of ControlCenter3. (See SCAN on page 73.) For details about how to configure the scan
settings of the ControlCenter3 buttons and to launch the application of your choice using
Using ControlCenter3 on page 70.
Note
• If you want to scan a document using the duplex scanning feature, you need to put the document in the
ADF and then choose 2sided (L)edge or 2sided (S)edge depending on your document layout.
• Choose your document layout from following table:
Portrait
Front
Front
(Scan) on the control panel, you have to install the Brother MFL-Pro suite and
Back Front
Back Front
Document Layout Table
(Scan) follows the configuration on
Landscape
Back
Back
Scanning
2
2
(Scan), see
LCD Message
(L)edge
(Long edge)
(S)edge
(Short edge)
57