Using The Scan Key (For Usb Or Parallel Cable Users) - Brother DCP-8070D Software User's Manual

Using the Scan key (For USB or Parallel cable users)

Note
• Parallel interface is not supported for Windows Vista
• If you use the Scan key when connected to a network, see Network Scanning (For models with built-in
network) on page 84.
• If the LCD shows error messages during scanning, see Troubleshooting in the User's Guide or Error and
maintenance messages in the User's Guide.
You can use (Scan) on the control panel to scan documents into your word processing, graphics or
E-mail applications or a folder on your PC.
Before you can use
connect the machine to your PC. If you installed the MFL-Pro Suite from the included CD-ROM then the
correct drivers and ControlCenter3 are installed. Scanning by
Device Button tab of ControlCenter3. (See SCAN on page 62.) For details about how to configure the scan
settings of the ControlCenter3 buttons and to launch the application of your choice using
Using ControlCenter3 on page 59.
Note
• If you want to scan a document using the duplex scanning feature, you need to put the document in the
ADF and then choose 2sided (L)edge or 2sided (S)edge depending on your document layout.
• Choose your document layout from following table:
Portrait
Front
Front
• Duplex scan is not supported by the DCP-8070D, MFC-8370DN and MFC-8480DN.
• Duplex scan is available from the ADF only.
• Duplex scan is not available for legal size paper.
• The XPS file format is available for Windows Vista
Specification files.
(Scan) on the control panel, you have to install the Brother MFL-Pro Suite and
Back Front
Back Front
Document Layout Table
®
.
(Scan) follows the configuration on
Landscape
Back
Back
®
or when using applications which support XML Paper
Scanning
2
2
(Scan), see
LCD Message
(L)edge
(Long edge)
(S)edge
(Short edge)
48