Scan To Image - Brother DCP-9040CN Software User's Manual

Using One-Touch or Speed-Dial number
You can also scan a document directly to an address you registered in a One-Touch or Speed-Dial number.
When you scan the document, the settings you registered with the One-Touch or Speed-Dial will be used for
the quality and the file type. Only One-Touch or Speed Dials with an E-mail address registered can be used
when you scan data using One-Touch or Speed-Dial. (I-fax addresses are not available for use.)
a
Put the document face up in the ADF, or face down on the scanner glass.
b
Press (Scan).
c
Choose One-Touch or Speed-Dial number.
d
Press Black Start or Color Start. The machine starts the scanning process.
Note
• Scan type depends on the settings on the Device Button tab, Black Start or Color Start do not change
the settings.
• You can store the scan resolution (Scan Profile) for each E-mail address if you store the E-mail address
in a One-Touch or Speed-Dial number. (See Dialling and storing numbers in Chapter 8 of the User's
Guide.)

Scan to Image

When you choose Scan to Image, your document will be scanned and sent directly to the Macintosh
designated on your network. ControlCenter2 will activate the default graphics application on the designated
®
Macintosh . You can change the Scan configuration. (See Image (example: Apple
a
Put the document face up in the ADF, or face down on the scanner glass.
b
Press (Scan).
c
Press a or b to choose Scan to Image.
Press OK.
If your machine is an MFC-9440CN or DCP-9040CN, go to Step e.
If your machine is an MFC-9840CDW or DCP-9045CDN, go to Step d.
d
Press a or b to choose 1sided, 2sided (L)edge or 2sided (S)edge. Press OK.
Note
If you want to scan a document using the duplex scanning feature, you need to put the document in the
ADF and then choose 2sided (L)edge or 2sided (S)edge depending on your document layout.
e
Press a or b to choose the destination Macintosh
Press OK.
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination
®
Macintosh on the control panel.
Press OK.
®
you want to send to.
Network Scanning
®
you
®
Preview) on page 180.)
198
11
11
11