Brother DCP-9040CN Software User's Manual page 68

Changing the default file name
a
For MFC-9440CN and MFC-9840CDW, press Menu, 5, 2, 2.
For DCP-9045CDN, press Menu, 4, 2, 2.
b
Enter the file name (up to 6 characters.)
Press OK.
Note
You cannot use a space for the first character.
c
Press Stop/Exit.
Understanding the Error Messages
Once you are familiar with the types of errors that can occur while you are using the Scan to USB,
you can easily identify and troubleshoot any problems.
Protected Device
This message will appear if the protect switch of the USB flash memory drive is on.
Rename the File
This message will appear if there is already a file on the USB flash memory drive with the same name as
the file you are trying to save.
Too Many Files
This message will appear if there are too many files stored on the USB flash memory drive.
Unusable Device
This message will appear if your USB flash memory drive is not supported by your Brother machine.
Scanning
2
2
2
61