Elsner WS1 Color Manual page 94

Drive groups
ATTENTION!
Only drives/units with the same function should be controlled together using a
single button (e. g. blinds or windows alone).
RF Router:
Der RF-Router leitet das Funk-Signal an andere Funkteilnehmer weiter, wenn die Funk-
strecke für eine direkte Verbindung zu lang ist.
Radio module type
Name
Radio status
Radio connection
WL400, WL800 roof vent:
Radio module type
Radio module name
Radio status
WL305/610 status
Control System WS1 Color / WS1000 Color • Version: 29.07.2024 • Technical changes and errors excepted.
92
Press the Allocate button to allocate drives and
devices to the buttons channels.
Select the channel of the button.
Select the drives and/or devices to be controlled.
Confirm your entry using the OK key.
„RF-Router" display
To change the name, press the button showing device
identification. Enter the required name in the box which
appears. Confirm your entry using the OK key.
 2.4. Input keyboard for names and codes
Display of radio status, serial number, version
Press the Allocate button to allocate othe radio partici-
pants to the router channels.
Select the router channel (channel 1 to 16).
Select the radi participants to be connected to the chan-
nel.
Confirm your entry using the OK key.
"WL400/800" display
To change the name, press the button showing device
identification. Enter the required name in the box which
appears. Confirm your entry using the OK key.
 2.4. Input keyboard for names and codes
Radio status display
Display of serial number, period, flap movements,
version
Basic Setting