Learn Wireless Connection; Status - Elsner WS1 Color Manual

This menu allows you to learn, control and delete radio connections. Press the buttons:
Installation
System

Learn wireless connection

Learn
Press Learn to bring the control unit into learning readiness mode. Then follow the in-
structions for the respective wireless participant (press PROG key or switch power sup-
ply on).
For wireless components that are learned by switching on power, you can switch on
the supply for all devices at the same time. The components learn themselves one after
the other automatically. For wireless components that are learned by pressing the PRG
button, please repeat the learning procedure with all of them.
As soon as the wireless connection has been established, the control unit reports "De-
vice successfully learnt" and beeps. Press to go back to the menu.

Status

Status
Press Status to see which connections already exist.
WGTH
WL400/800
You can now select, monitor and adjust the settings for the individual wireless partic-
ipants. If no adjustments have been made, the names of the wireless components are
the same as the names of the devices. Later the names given are shown on the buttons.
Different operational data will be shown for the devices:
WGTH-UP an WG AQS/TH indoor sensor
Radio module type
Name
Radio status
Control System WS1 Color / WS1000 Color • Version: 29.07.2024 • Technical changes and errors excepted.
89
Remo 8
WL-Z
"WGTH" display
To change the name, press the button showing device
identification. Enter the required name in the box which
appears. Confirm your entry using the OK key.
 2.4. Input keyboard for names and codes
Radio status display
Radio Connection
RF Relay
RF MSG
Basic Setting