Elsner WS1 Color Manual page 52

Use the arrow buttons to change the start and maximum values according to your wis-
hes. Default setting: Start with level 1, maximum level 8 (full level utilisation).
Confirm your setting with the OK button.
Min. Exhaust Level
Press the button to set the minimum and maximum ventilation speed of the motorised
roof ventilators. The further the indoor temperature and air humidity lie above the re-
ference values, the higher the ventilator shifts.
Use the arrow buttons to change the start and maximum values according to your wis-
hes. Default setting: Start with 0%, maximum 100% (full level utilisation).
Confirm your setting with the OK button.
Night-time Cooling
Press the button to set the times for night-time re-cooling. The button is only activated
once the general settings for night-time re-cooling have been configured.
 System > Automatic Settings > General Settings > Night-time Cooling
 3.3. Set night-time re-cooling (ventilation)
Press Select to select the time during which the night-time re-cooling will operate. Ac-
tivate one or more periods on the list.
Confirm your setting with the OK button.
To change any of the time periods, press Timer.
 3.3. Set timer
Be careful that your settings for timed closure do not prevent night-time re-cooling
operations! A set supply air temperature block can also prevent night-time re-cooling.
NTC Indoor Temp.
Press the button to set the indoor temperature to the desired cooling level (for the
night-time re-cooling). The button is only activated once a night-time re-cooling period
has been set.
Use the arrow keys to change the value as required. Default setting: 16.0°C.
Confirm your setting by pressing OK.
Control System WS1 Color / WS1000 Color • Version: 29.07.2024 • Technical changes and errors excepted.
50
Max. Exhaust Level
Not on fresh air/heating-combos on RF-VM.
Automatic settings
Only for WL400/800.