Automatic Roof Gutter Heating Settings - Elsner WS1 Color Manual

3.1.11.Automatic roof gutter heating settings

For connected roof gutter heatings the following automatic settings can be changed:
• Temperature range within which the heating will be switched on
• Enable/Disable automatic reset
The automatic gutter heating functions can be accessed by pressing the buttons:
Automatic
Settings
System
Now you can select individual roof gutter heatings and adjust their settings. For each
heating the following settings can be changed:
Temperature Range
Use the arrow keys to set the temperature range within which the roof gutter heating
will be switched on. If the temperatures are very cold, no condensate forms and the
heating can remain switched off. Default setting: 5.0°C to -5.0°C.
Confirm your setting with the OK button.
Automatic Reset
Press the button to enable or disable the switchover to automatic mode at a set point
in time, or following a manual intervention.
The general Automatic Reset occurs daily at the same time.
Switching on: To set the gutter heating to Automatic at a set point in time, select Yes
(this is the default setting).
Switching off: To switch off the gutter heating's Reset function, select No.
Alternatively, the automatic function can be reactivated at a set time following a ma-
nual intervention.
Switching on: To perform an Automatic Reset after a manual intervention, select Yes.
Switching off: To switch off the gutter heating's Reset function, select No (this is the
default setting).
Confirm your setting with the OK button.
Automatic Reset time and/or period can be set.
 System > Automatic Settings > General Settings > Automatic Reset
 3.3. Define automatic reset
Control System WS1 Color / WS1000 Color • Version: 29.07.2024 • Technical changes and errors excepted.
59
Gutter Heating
Automatic settings