NAC Image Technology MEMRECAM Q5 User Manual page 12

Safety Precautions
Using the cables (Common)
● Do not unplug the cable with the power on
● Do not put foreign articles such as metal, trash or water inside the connector.
(Malfunction or electrical shock may occur if the cable is connected or removed with the power
on.)
⇒ Unplug the cable only after turning off the power.
● Do not touch the plug or connector with wet hands.
(Malfunction, electrical shock or fire may occur.)
Using the AC Adapter（Common）
● Do not disassemble or modify
（ Do not loosen screws on the AC adapter or open the cover even if the AC adapter
malfunctions.）
⇒ Contact the store where purchased for inspection ・maintenance ・repair.
● Do not use in locations with smoke or flammable or corrosive gases, or strong magnetic fields
（Malfunction, injury or fire may occur.）
 ⇒ Do not use in dirty, dusty or humid locations.
● Do not subject to strong vibration or impact
(The AC adapter does not have vibration or impact resistance properties based on actual impact
testing. If subject to strong impact or vibration, malfunction or injury may occur.)
⇒ Contact the store where purchased or our service center if using in such environments.
● When there was an abnormality, turn off the power switch of the AC adapter and pull an input
power supply plug
（If water or other foreign objects get inside, if the exterior breaks due to being dropped, if
the camera becomes hotter than normal, or if smoke, odors or noises are emitted.）
⇒ Contact the store where purchased or our service center.
10
(00419)D