NAC Image Technology MEMRECAM Q5 User Manual page 10

Safety Precautions
Using the Q5 unit
● Do not disassemble or modify
（Do not loosen screws on the Q5 unit or open the cover even if the Q5 malfunctions.）
⇒ Contact the store where purchased for inspection ・maintenance ・repair.
● Do not use in locations with smoke or flammable or corrosive gases, or strong magnetic fields
（Malfunction, injury or fire may occur.）
⇒ Do not use in dirty, dusty or humid locations.
● When there was an abnormality, turn off power switch of Q5 and pull the input power supply
plug of a power supply cable connected to Q5 or the AC adapter which turned off a power
supply
（If water or other foreign objects get inside, if the exterior breaks due to being dropped, if
the Q5 becomes hotter than normal, or if smoke, odors or noises are emitted. The Q5 heats up
during operation so this is not a malfunction.）
⇒Contact the store where purchased or our service center.
Confirm the input power（Q5 unit）
● Check the input power before connecting.
 During AC adapter use：AC100～240V/47～63Hz
 During DC power connection：DC20～32V
(Malfunction, electrical shock or fire may occur if connected to the wrong power supply.)
8
(00419)D