NAC Image Technology MEMRECAM Q5 User Manual page 11

Using the camera head
●Do not disassemble or modify
（Do not loosen screws on the camera head or open the cover even if the camera head
malfunctions.）
⇒ Contact the store where purchased for inspection ・maintenance ・repair.
● Do not use in locations with smoke or flammable or corrosive gases, or strong magnetic fields
(Malfunction, injury or fire may occur.)
⇒ Do not use in dirty, dusty or humid locations.
● Do not leave the camera cable connected when the Q5 is still powered
（Malfunction may occur.）
⇒ Contact the store where purchased for inspection ・maintenance ・repair.
● When there was an abnormality, turn off power switch of Q5 and pull the input power supply
plug of a power supply cable connected to Q5 or the AC adapter which turned off a power
supply
(If water or other foreign objects get inside, if the exterior breaks due to being dropped, if the
camera becomes hotter than normal, or if smoke, odors or noises are emitted. The camera heats
up during operation so this is not a malfunction.)
⇒ Contact the store where purchased or our service center.
(00419)D
9
Safety Precautions