NAC Image Technology MEMRECAM ACS-3 User Manual page 274

Troubleshooting
List of Warnings (2/3)
Warning
DRP temperature is
outside the range
Memory protected.
AUTOVIEW=AUTO
Memory protected.
REC MODE=****/
Power Drop Detect-
ed. *******
RTC battery is low
power!
Details
The camera
temperature is
abnormal.
The memory is
protected by the
auto view function.
The memory is
protected by the
auto segment
switch "AUTO"
setting.
The power supply
input is unstable
(outage).
The RTC battery is
dead.
It is set to an old
date.
Response
•Ambient temperature is high → Use within
the temperature range for warrantied
operation. Do not place the unit in direct
sunlight or where hot.
•The intake port and exhaust port are
plugged → Check the location of the
intake port and exhaust port and make
sure they aren't plugged.
•Delete the recorded video.
•Turn the auto view function OFF.
•Delete the recorded video.
•Change the settings for the recording
method.
When using the AC POWER SYSTEM →
Turn off the power to the camera and AC
adapter and contact us.
When using another power source →
Check the voltage, current and waveform
of the power supply connected.
Contact us to replace the RTC battery.
•Set to a date before 2003 → Set to the
current date.
•When connected with MLink to a PC that
is set to a date before 2003→ set the
date on the PC. (Refer to the MLink user's
guide for details)
9-64
 A
10-51
7-7
7-7
7-19
(00471)H