NAC Image Technology MEMRECAM ACS-3 User Manual page 201

Stop the fan
Stop fan at FULL.
(Forced cooling mode)
i.Press the numeric part of [Pausing
Dur.] to specify the stop time (in
seconds).
ii.Press the [STOP] button to stop the
1
cooling fan until the specified time
elapses or the temperature in the
camera reaches the upper limit[Limit
Temp.] before the lapse of time.
Press Button [Drive] to cancel the
fan stop and activate the fan.
Fan Mode: Current fan control mode
FULL/AUTO: Mode selecting button
Current Temp.: Current in-camera tem-
perature (No setting)
Limit Temp.: Upper limit temperature
(No setting)
2
Remain Time: The remaining time of fan
stop (No setting)
Status: COOL (During cooling)/READY
(Fan can be stopped) /PAUSE (Fan is
stopped) (No setting)
Pausing Dur.: Fan stop time
STOP/DRIVE: Fan stop/operation button
(00471)H
i
7-45
Change fan control
i
ii ii