NAC Image Technology MEMRECAM ACS-3 User Manual page 12

Safety Precautions
Using the main camera unit
●Do not block the release of heat from the camera
(The ACS-3 has a fan that cools the camera. Do not block the intake ports
or vents. Additionally, do not place in narrow locations where there is no air
circulation, or on carpet or bedding.
If heat builds up inside, malfunction or fire may occur.)
●Do not put fingers or objects in the lens mount
(The sensor is visible if the lens or cap on the lens mount of the camera is
removed. If fingers or items are placed inside, the sensor may become scratched
or dirty which may adversely affect the image quality.)
●When mounted on a tripod, do not pick up by the handle of the device
(If mounted on a tripod, since the handle of the device will also take on the weight
of the tripod, the handle may break and cause bodily injury.)
→ If mounted on a tripod, make sure to hold both the tripod and the main unit of
the camera when carrying them.
●Do not place heavy items on this device
(If tipped over or dropped, the exterior may be damaged, which may cause bodily
injury. Additionally, if heavy items are placed on it, the exterior may be deformed,
causing the interior components to be damaged and malfunction.)
●Check the ambient temperature of the location where used and stored.
●Use temperature range: 0 to 40°C, humidity 30 to 80%RH, no condensation
●Storage temperature range: -10 to 60 °C, humidity 20 to 80%RH, no
condensation
Handling while moving or transporting
●Use the dedicated storage case for moving or transporting this device
(To protect the camera from malfunction, use the optional dedicated storage
case for transport)
x
(00471)H