NAC Image Technology MEMRECAM ACS-3 User Manual page 11

Check the input power
●Check the input power before connecting.
●During AC adapter use: AC100 to 240V/47 to 63Hz
●During DC power connection: DC20 to 32V
Using the AC Adapter
●Do not disassemble or alter
(Do not loosen screws on the AC adapter or open the cover even if the AC adapter
malfunctions.)
→ Contact the store where purchased for inspection · maintenance · repair.
●Do not use in locations with smoke or flammable or corrosive gases, or
strong magnetic fields
(Malfunction or fire may occur.)
→ Do not use in dirty, dusty or humid locations.
●Do not subject to strong vibration or impact
(The AC adapter does not have vibration or impact resistance properties based
on actual impact testing. If subject to strong impact or vibration, malfunction or
injury may occur.)
→ Contact the store where purchased or our service center if using in such
environments.
●If there is a malfunction, turn the AC adapter power off and unplug the
power cord.
(If water or other foreign objects get inside, if the exterior breaks due to being
dropped, if the camera becomes hotter than normal, or if smoke, odors or noises
are emitted.)
→ Contact the store where purchased or our service center.
(00471)H
ix
Safety Precautions