Aeronaut Shorty Building Instructions page 8

43
18
Glue left fuselage side onto former/servo tray assembly and
place fuselage on building board, left side down. Check for
correct alignment of fuselage sides and weigh down until
glue has set.
Again, place suitable weight on brace 42.
46
44
17
42
46
Glue former/servo tray assembly in place on right fuselage side
together with wing retainer 43.
Place a suitable weigth onto brace 42 to achieve a good joint with
the fuselage side.
42
45
19
Using triangular braces 46 to glue former 44 to motor
mount 45. Braces 46 make ensure that former 44 is
glued in place at the correct angle. Required side thrust
is already designed into the motor mount.
Make sure letter „R" is on the right hand
side of motor mount 45, facing up.