Page 1
IP65 High Bay Dual Sense Sensor HIM34 IP65 HF and PIR, Daylight Harvest for Independent DALI Technical Data Sensor Data Input Characteristics Model No. Model No. HIM34 HIM34 Sensor principle High Frequency (microwave), PIR Mains voltage 220~240VAC 50/60Hz Stand-by power Operation frequency <1W...
Page 2
B. Screw to the Luminaire by conduit (HIM34B) 59.6 0.825” Infrared receiver LED indicator Rotary switch for programing Photocell 66.6 89.9 Sensor module Cable entry C. Attach to the shade by clamp (HIM34C) Infrared receiver LED indicator Rotary switch for programing Photocell Angle adjustment 28.5...
Driver Black DALI + DALI HIM34 1. 200 metres (total) max. for 1mm〔 CSA (Ta = 50メ) 2. 300 metres (total) max. for 1.5mm〔 CSA (Ta = 50メ) Detection Pattern End user can choose the suitable PIR lens in real application to ful ll various requirements. Three options are offered for selection:...
Functions and Features Daylight Harvest Light will not switch on The light switches on The light turns on at full or dims to maintain the lux level. The light output when natural light is automatically with regulates accroding to the level of natural light available. suf cient, even there is presence when natural motion detected.
Page 5
Settings (Remote Control HRC-11) Press button “ON/OFF” to select permanent ON or permanent OFF mode. * Press button “AUTO”/ “RESET” to exit this mode. Press button “RESET”, perform DIP Switch/Rotary Switch settings. *The default settings are: Detection range 100%; Hold-time 5min; Stand-by time +∞; threshold Stand-by dimming level 10%;...
Page 6
Additional Information / Documents 1. Regarding precautions for microwave sensor installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Microwave Sensors - Precautions for Product Installation and Operation 2. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy Subject to change without notice.
Need help?
Do you have a question about the HIM34 and is the answer not in the manual?
Questions and answers