8: Operating The Device - FIBARO ROLLER SHUTTER 4 Operating Manual

12

8: Operating the device

The device enables connecting switch to the S1 and S2 terminals. These
can be monostable or bistable switches.
Switch buttons are responsible for managing the blind movement.
Description:
– Switch connected to the S1 terminal
– Switch connected to the S2 terminal
General tips:
• You can perform/stop movement or change direction using switch(es)
• If you set flowerpot protection option the down movement action is
performed only to a defined level.
• If you control only a venetian blind position (not slats rotation) the slats
return to their previous position (in aperture level 0 - 95%).
Available parameters:
Monostable switches - hold to move
Example of the switch design:
Available
Parameter Devices
values
0 – monostable
Roller
switches – click
blind,
to move
awning,
20 – Switch
pergola,
type
curtain,
Venetian
blind
0
Roller
blind,
awning,
pergola,
curtain
151 –
Operating
1 (0-90°)
mode
or
2 (0-180°)
Venetian
blind
Favorite position – available
Description
This parameter determines
which mode S1 or S2 inputs
operate with.
• 1 x click of the switch –
initiate the up movement to
the limit position
• next click – stop
• 1 x click of the switch –
initiate the down movement
to the limit position
• 2 x click of the or
switch – favorite position
• hold the switch – up
movement until release
• hold the switch – down
movement until release
13