13: Advanced Parameters - FIBARO ROLLER SHUTTER 4 Operating Manual

28
Switch type
Switch
Parametr (20)
Value Name
Single
S1 or S2
4 bistable
switch
Single Click Double Click
Command ID Command ID
Window Window
Covering Covering
Id_Roller Id_Roller
Start Level Stop Level
Change Change
13:
Advanced parameters
The device enables customizing its operation to a user's needs using
configurable parameters.
The settings can be adjusted using the Z-Wave controller to which the
device is added. The way of adjusting them might differ depending on the
controller.
In the NICE interface device configuration is available as a simple set of
options in the Advanced Settings section.
If you use Yubii Home App, many of the following parameter settings can
be changed in the device settings section.
To configure the device:
1. Go to Settings .
2. Go to Devices.
3. Select the relevant device from the list.
4. Select the Parameters tab.
5. Specify a group and devices to associate with.
6. Save your changes.
Parameter Description Size
This parameter
determines which
20 – Switch
switch types and mode 1 [byte]
Type
S1 and S2 inputs
operate with.
24 – This parameter enables
Buttons reversing the operation 1 [byte]
orientation of the buttons.
Default Available
Value Values
0 - Monostable
switches – click to
move
1 - Monostable
switches – hold to
move
0 (default
2 - Single monostable
value)
switch
3 - Bistable switches
4 - Single bistable
switch
5 - Three-state switch
0 – default (1 button
st
UP, 2 button DOWN)
nd
0 (default
1 – reversed (1
st
value)
button DOWN, 2
nd
button UP)
29