9: Menu; 10: Resetting The Device To Factory Defaults - FIBARO ROLLER SHUTTER 4 Operating Manual

20

9: Menu

Menu enables to perform the Z-Wave network actions.
To use the menu:
1. Switch off the mains voltage (disable the fuse).
2. Remove the device from the wall switch box.
3. Switch on the mains voltage.
4. Press and hold the PROG button to enter the menu.
5. Wait for the LED indicator to indicate the desired menu position with
color:
• BLUE - autocalibration
• YELLOW - factory reset
6. Quickly release and click the PROG button again.
7. After clicking the PROG button, the LED indicator confirms the menu
position by blinking.

10: Resetting the device to factory defaults

The reset procedure enables you to restore the device back to its factory
settings, which means all information about the Z-Wave controller and a
user's configuration is deleted.
Please use this procedure only when the network primary controller
is missing or otherwise inoperable.
1. Switch off the mains voltage (disable the fuse).
2. Remove the device from the wall switch box.
3. Switch on the mains voltage.
4. Press and hold the PROG button to enter the menu.
5. Wait for the LED indicator to glow yellow.
6. Quickly release and click the PROG button again.
7. During the factory reset, the LED indicator blinks yellow.
8. After a few seconds the device is restarted, which is signalled with the
the red color of the LED indicator.
21