Matrix TBCC Manual page 9

CONSOLE OPERATION
PAIRING CHEST TRANSMITTER TO CONSOLE
1. From sleep mode, press any key to activate the console.
2. Press and hold Set key (
3. For automatic pairing, press Mode Key (
wearing a chest strap and move to within 12" (30 cm) of the console marked with the ANT+ symbol.
4. Once heart rate has been paired, press Set key (
HEART RATE LINK HERE
For ANT+ chest transmitter, the code is alphanumeric; if an analogue 5.3Khz transmitter is used 4 zero digits (0000) will appear.
Once the chest transmitter and console have been paired, the heart rate reading will appear in the middle frame of the display. If pairing is unsuccessful
after 20 seconds, or if heart rate reading is incorrect, move closer to the console and press Mode key (
HEART RATE LINK HERE
ENGLISH
). This will display heart rate and ANT+ symbol.
), this will display a four digit code below the stated heart rate. For heart rate pairing, you must be
) to input personal data settings and adjust using the up/down keys (
9
).
) to repeat the procedure.