Matrix TBCC Manual page 3

ASSEMBLY
UNPACKING
Unpack the equipment where you will be using it. Place the carton
on a level flat surface. It is recommended that you place a protective
covering on your floor. Never open box when it is on its side.
IMPORTANT NOTES
During each assembly step, ensure that ALL nuts
and bolts are in place and partially threaded.
Several parts have been pre-lubricated to aid in assembly
and usage. Please do not wipe this off. If you have difficulty,
a light application of lithium grease is recommended.
WARNING!
There are several areas during the assembly process that
special attention must be paid. It is very important to follow
the assembly instructions correctly and to make sure all parts
are firmly tightened. If the assembly instructions are not
followed correctly, the equipment could have parts that are not
tightened and will seem loose and may cause irritating noises.
To prevent damage to the equipment, the assembly instructions
must be reviewed and corrective actions should be taken.
NEED HELP?
If you have questions or if there are any missing
parts, contact Customer Tech Support.
ENGLISH
TOOLS REQUIRED:
F 6 mm Allen Wrench
F 5 mm Allen Wrench
F 10 mm Allen Wrench
F Flat Wrench (15mm/17mm 325L)
F Phillips Screwdriver
F 8 mm Socket Wrench
PARTS INCLUDED:
F 1 Main Frame
F 1 Front Stabilizer Tube
F 1 Rear Stabilizer Tube
F 1 Transport Handle
F 1 Console
F 1 Console Mast
F 1 Console Mast Cover Set
F 1 Console Mounting Plate
F 1 Device and Water Bottle Holder
F 2 Pivoting Handlebars
F 2 Foot Pegs
F 1 Bicycle Saddle
F 2 Pedals
F 1 Hardware Kit
SERIAL NUMBER
MODEL
TBCC MATRIX TOTAL BODY CYCLE
* Use the information above when calling for service.
3
WARNING WARNING
HOLD SEAT WITH ONE HAND WHILE ADJUSTING HEIGHT. ENSURE
HEART RATE MONITORING SYSTEMS MAY BE
CLAMP IS FULLY ENGAGED PRIOR TO USE.
INACCURATE. OVER EXERCISE MAY RESULT IN
SERIOUS INJURY OR DEATH. IF YOU FEEL FAINT,
SPINNING PEDALS CAN CAUSE INJURY. THIS EXERCISE BICYCLE
STOP EXERCISING IMMEDIATELY. THIS
DOES NOT HAVE A FREEWHEEL AND PEDAL SPEED MUST BE
STATIONARY TRAINING EQUIPMENT IS NOT
REDUCED IN A CONTROLLED MANNER.
SUITABLE FOR HIGH ACCURACY PURPOSES.
SET UP AND OPERATE THE STATIONARY EXERCISE BICYCLE ON
ALL WARNINGS AND INSTRUCTIONS SHOULD BE
A SOLID LEVEL SURFACE. CARE SHOULD BE TAKEN IN
READ AND PROPER INSTRUCTION OBTAINED PRIOR
MOUNTING AND DISMOUNTING THE STATIONARY EXERCISE
TO USE. USE THIS EQUIPMENT FOR ITS INTENDED
BICYCLE. BEFORE DISMOUNTING, BRING THE PEDALS TO A
PURPOSE ONLY. CONSULT A PHYSICIAN BEFORE
COMPLETE STOP.
USING THIS EQUIPMENT.
KEEP FEET CLEAR OF MOVING HANDLEBARS.
KEEP CHILDREN UNDER THE AGE OF 14 AWAY
FROM EXERCISE EQUIPMENT.
USE THE STATIONARY TRAINING EQUIPMENT IN A
SUPERVISED ENVIRONMENT UNDER THE DIRECT
SUPERVISION OF A TRAINED INSTRUCTOR.