Entering The Dimensions Of The Tools; Modification Of Tool Dimensions - Fagor 8025 GP Operating Manual

3.8.3. Entering the dimensions of the tools

- Key in the number of the tool. This will appear on the lower left of the screen.
- Press R.
- Key in the value of the radius of the tool. Max. value:
+/- 999.999 mm or +/-39.3700 inch.
- Press L.
- Key in the value of the length of the tool.
Max. value:+/-999.999 mm or +/-39.3700 inch.
- Press I. Key in its value.
Maximum value +/-32.766 mm or +/-1.2900 inches.
- Press K. Key in its value
Maximum value +/-32.766 mm or +/-1.2900 inches.
- Press ENTER. (If what is written is correct). The values are entered into memory.

3.8.4. Modification of tool dimensions

I) During the writing process
a) Modification of characters
If during the writing of the dimensions of a tool already written has to be modified
(R,L,I,K or any number):
- Use the
deleted.
- To modify, simply key in the new character. To delete it, press the CL key.
- If DELETE is pressed, the characters to the right of the cursor will be deleted.
8025/8030 CNC OPERATING MANUAL
keys to place the cursor on the character to be modified or
59