Following Error Display Mode; Arithmetic Parameters Display Mode - Fagor 8025 GP Operating Manual

3.1.2.3. ACTUAL POSITION display mode.
The position of the axes is displayed with large characters. The number of the programme, the
block, the status of the G, M, T, S and F functions, as well as PLC messages, if any, comments
and the meaning of the function keys, are also displayed.

3.1.2.4. FOLLOWING ERROR display mode.

The axis following error is displayed, as well as the programme number, the block number, the
status of the G, M, T, S and F functions, as well as PLC messages, if any, comments and the
meaning of the function keys, are also displayed.

3.1.2.5. ARITHMETIC PARAMETERS display mode.

If the [PARAMETERS] function key is pressed, on the upper part of the screen a list of
parameters will appear with their corresponding value at that moment. By pressing either
of the keys and
For example:
P46 = -1724.9281
P47 = -.10842021 E2
E-2 means ten to the power of minus two.
8025/8030 CNC OPERATING MANUAL
the remaining parameters will appear with their values.
15