Measuring And Loading Of Tool Offsets With A Probe - Fagor 8025 GP Operating Manual

3.5.10. Measuring and loading of tool offsets with a probe.

With this CNC, in the JOG mode the tool dimensions can be quickly measured and loaded with
a probe. To do this, a tool measuring probe must be installed with its sides parallel to the axes
and in an established position on the machine.
The values on the sides of the probe on each axis and with respect to the machine reference zero
must be entered in the following parameters:
P910 minimum (X1) value along the X axis
P911 maximum (X2) value along the X axis
P912 minimum (Y1) value along the Y axis
P913 maximum (Y2) value along the Y axis
P914 minimum (Z1) value along the Z axis
P915 maximum (Z2) value along the Z axis
40 8025/8030 CNC OPERATING MANUAL