Table of Contents
Advertisement
Control Panel : iSCSI : Bi-directional Authentication Page
The Bi-directional Authentication page displays the Initiators List gathered from those
iSNS servers that this box has registered with or you can enter the name of an iSCSI
initiator or username and password, manually if you are not using iSNS.
Field/Item
Description
Initiator List
This list displays all initiators connected to the targets configured on this StorTrends
storage appliance.
Note:
Note:
Rescan List button
You can use this button to refresh the list.
Password
This field allows you to set a password (target secret) for the selected initiator. This secret
has to match the one entered at the initiator to allow mutual Chap authentication.
Note:
Confirm Password
This field allows you to verify the newly entered password for the selected initiator.
Set Password button
Use this button to save changes and make the changes active.
76
StorTrends/ManageTrends (version 2.7) Web Interface User's Guide for the StorTrends 2200 Storage Appliance
A minimum of one ISNS server needs to be configured, and the ISNS server
should have a list of registered initiators that can be accessed by the StorTrends
storage appliance.
Most ISNS servers will not allow the initiator list to be queried without
registering one target node with it first. This can be done by creating a disk and
associating it with a target in Storage Explorer.
Initiator passwords must be a minimum of 12 characters and a maximum of 16
characters in length.
Advertisement
Table of Contents
