American Megatrends StorTrends 2200 User Manual page 190

Step Description
7 The StorTrends iTX installation takes approximately 30 minutes. You will see various screens
throughout the installation. At times there will be a long period where you will see a blank
screen. However, do not try to do anything. Leave the system alone until the StorTrends iTX
Installation CD ejects and you see the screen where it tells you that the installation is complete.
Press the <ENTER> key to reboot.
StorTrends iTX 2.7
8 Congratulations! You have successfully installed StorTrends iTX on your StorTrends 2200. At
this point, you can physically disconnect the external USB CD-ROM drive.
Proceed to Step Two: Get the IP Address in Chapter One, StorTrends storage appliance Configuration
to configure your StorTrends storage appliance.
176 StorTrends/ManageTrends (version 2.7) Web Interface User's Guide for the StorTrends 2200 Storage Appliance
Complete
Congratulations, your AMI StorTrends installation is complete.
Remove any media used during the installation process and press
<Enter> to reboot your system.
Reboot
<Enter> to reboot
STOP!