Table of Contents
Advertisement
Replication Management : Create New Replication
This table describes how to create a new SAN Volume Replication Pair.
Step
Description
2
Select the Primary IP Address from the dropdown box. The dropdown box contains a list
of the IP addresses of the local primary StorTrends storage appliance. Keep in mind that
the StorTrends storage appliance ships with two NICs, so there should only be two IP
Addresses in this field unless you have installed another NIC.
3
Next, select a SAN Volume that you want to replicate from the table. The table displays a
list of Volumes on the primary StorTrends storage appliance.
4
Next, either manually enter the IP Address of the remote StorTrends storage appliance or
select it from the remote server dropdown menu.
5
Enter credentials for the remote StorTrends storage appliance and click on Next. Once
logged in, all suitable SAN Volumes on the remote StorTrends storage appliance will be
shown if available. If none, you have the option to create a new volume in an existing or
new storage pool.
6
Select the SAN Volume that you want to configure as a replica of the local volume or
enter information for a new pool and volume to be created on the secondary.
7
Select the Replication type (if applicable).
8
Set the Resync Priority. This field allows you to customize your resync priority. 25% is
the default setting.
Resync is used to synchronize the volumes. Setting the resync priority closer to 100%
makes the volumes more current, however it takes more system resources (such as CPU
and memory resources) when this setting is higher.
9
Click the Create Replication Pair button.
Chapter Two : Managing the StorTrends Storage Appliance 137
Advertisement
Table of Contents
