Use the following instructions as a basis.
The Quick and Easy Setup Wizard will select all the physical hard disk drives present in
the StorTrends iTX StorTrends storage appliance to create the RAID array. SAN and
NAS volume names are automatically generated. A default NAS Share is also
automatically created. In the Quick and Easy Setup Wizard the SAN and NAS Volumes
are configured to use Exact Provisioning. Twenty percent of the physically available
hard disk space should be reserved if you are planning to use snapshot storage.
Step One: Quick Start Setup Wizard
If the storage has not been configured on your StorTrends storage appliance, you will be
prompted to run the Wizard. Click the Quick Start Setup option, and then click Next.
Note:
Chapter One : Storage Appliance Configuration
7