American Megatrends StorTrends 2200 User Manual page 189

Step Description
6 The StorTrends iTX installation begins, but before it proceeds, it will prompt you with a
message depending on how many notebook hard disk drives you have installed. Your
StorTrends 2200 has a dedicated bay for up to two notebook hard disk drives used to hold the
operating system.
If there is only one notebook hard disk drive installed, you will be prompted with a message
stating, "Warning!!! Detected a single OS disk for the StorTrends
iTX installation. Any OS disk failure will result in the system
becoming unusable. Choose "YES" to continue, "NO" to exit from
the installation."
Welcome to StorTrends iTX 2.7
If two notebook hard disk drives are installed, StorTrends iTX will automatically detect them
and will mirror the installation of itself over both hard disk drives. Prior to beginning the
installation, you will be prompted with the following message, "Detected multiple
disks. The OS will be installed on a RAID 1 array."
Welcome to StorTrends iTX 2.7
Note:
Note:
OS Array Configuration
Warning!!! Detected a single OS disk for the
StorTrends iTX installation. Any OS disk failure
will result in the system becoming unusable.
Choose YES to continue,
NO to exit from the installation.
YES NO
<Enter> to reboot
OS Array Configuration
Detected multiple disks. The OS will
be installed on a RAID 1 array.
OK
<Enter> to reboot
It is recommended that you install at least two notebook hard disk drives.
In StorTrends iTX 2.7.10.19 and older version, if StorTrends iTX discovers
two notebook hard disk drives, it will not prompt at all.
Appendix C : Installation Procedure 175