Table of Contents
Advertisement
Auto-recoverabl
e error
2.5 Power on status
Paper cover close when power off. Press the power button, the error indicator and paper out indicator
flash twice alternately and out, then printer will be on the normal working mode.
2.6 Self-test
The self-test will check the condition of printer, if the printer prints out the self-test receipt correctly, it
means the printer works normally, except interface with host. Otherwise it needs to repair.
The self-test will print out the name of manufacturer, printer type, interface type and printer defaulted
parameter, 96 characters in ASCII and defaulted Code page content(the language is English) or the
name of Chinese characters library(if the language is Chinese) and Bar code type.
Way of self-test: hold down【FEED】button and turn on the power, release the button after the error
indicator and the out of paper indicator flash alternately twice. self-test begins automatically at this
moment.as Fig.2-6 shows
LED Flickers constantly: printing head
over-heat; upper case cover opening
error during printing
Type
12
Advertisement
Table of Contents
Need help?
Do you have a question about the SP-POS8811A and is the answer not in the manual?