Advanced - Nexcom NEX 913 User Manual

Chapter 3: BIOS Setup

Advanced

The Advanced menu allows you to configure your system for basic operation.
Some entries are defaults required by the system board, while others, if
enabled, will improve the performance of your system or let you set some
features according to your preference.
Setting incorrect field values may cause the system to
malfunction.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main Advanced Chipset Security
Case Open Warning [Disabled]
Chassis Opened [No]
CPU Configuration
Trusted Computing
SATA Configuration
USB Configuration
Hardware Monitor
SIO Configuration
AMT Configuration
PCH-FW Configuration
Power Management
Digital IO Port Configuration
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Case Open Warning
Enables or disables case open warning detection function.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
Boot Save & Exit
Case Open detecting function
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
CPU Configuration
This section is used to configure the CPU settings.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
CPU Configuration
Type
Microcode Revision
Speed
Number of Processors
VMX
SMX/TXT
L1 Data Cache
L1 Instruction Cache
L2 Cache
L3 Cache
L4 Cache
Hyper-Threading
Intel (VMX) Virtualization
Technology
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Hyper-Threading
Enables or disables hyper-threading technology.
Intel (VMX) Virtualization Technology
®
When this field is set to Enabled, the VMM can utilize the additional
hardware capabilities provided by Vanderpool Technology.
25
Enabled or Disabled
Hyper-Threading Technology.
Genuine Intel(R) CPU
0000 @ 1.60GHz
B4
1600 MHz
6Core(s) / 12Thread(s)
Supported
Supported
32 kB x 6
32 kB x 6
256 kB x 6
→←: Select Screen
12 MB
↑↓: Select Item
N/A
Enter: Select
+/-: Change Opt.
F1: General Help
[Enabled]
F2: Previous Values
[Enabled]
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NEX 913 User Manual