Nexcom NEX 913 User Manual page 40

Chapter 3: BIOS Setup
USB Configuration
This section is used to configure the USB.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
USB Configuration
USB Controllers:
1 XHCI
USB Devices:
1 Keyboard, 1 Mouse
Legacy USB Support [Disabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Legacy USB Support
Enable Enables Legacy USB.
Auto Disables support for Legacy when no USB devices are connected.
Disable Keeps USB devices available only for EFI applications.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
Hardware Monitor
This section is used to monitor hardware status such as temperature, fan
speed and voltages.
Enables Legacy USB support.
AUTO option disables legacy
support if no USB devices are
connected. DISABLE option will
keep USB devices available
only for EFI applications.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
System Temperature
Detects and displays the current system temperature.
CPU Temperature (PECI)
Detects and displays the current CPU temperature.
Chassis Fan 1 Speed and Chassis Fan 2 Speed
Detects and displays the current chassis fan 1 and fan 2 speed.
27
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Pc Health Status
Smart Fan Configuration

System Temperature : +25 °c
CPU Temperature (PECI) : +39 °c
CPU Fan Speed : 2509 RPM
Chassis Fan 1 Speed : N/A
Chassis Fan 2 Speed : N/A
VCORE : +0.752 V
+12V : +12.384 V
+5V : +5.140 V
3VSB : +3.376 V
+3.3V : +3.376 V
VBAT : +3.120 V
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Smart Fan Configuration
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NEX 913 User Manual