Nexcom DNA 140 User Manual page 64

Chapter 4: BIOS Setup
USB Configuration
xDCI Support
Enable or disable xDCI (USB OTG Device).
USB2 PHY Sus Well Power Gating
Enable or disable USB2 PHY Sus Well Power Gating.
USB PDO Programming
Enable or disable USB PDO Programming.
USB Overcurrent
Enable or disable USB Overcurrent.
USB Overcurrent Lock
Enable or disable USB Overcurrent Lock.
Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved.
USB Audio Offload
Enable or disable USB Audio Offload.
Enable HSII on xHCI
Enable or disable HSII on xHCI.
USB3.1 Portx Speed Selection
Configure the USB3.1 Portx Speed.
USB Port Disable Override
Enable or disable USB Port Disable Override.
50
DNA 140 User Manual