Using Remote Unit; Keyboard Shortcut Command Sequences - StarTech.com STCSV565UTP Manual

Using Remote Unit

Like the Host Unit, the Remote Unit performs two functions: it allows a user at the
Remote Unit to assume control of Computer A if the Host Unit is set to Auto or Remote
mode, and it also permits the user seated at the Remote Unit to use a locally connected
computer (Computer B) as though the SV565UTP KVM extender was transparent.
You can use either keyboard shortcuts or the mode switch on the top of the Remote
Unit to alternate control between A and B. Unlike the Host Unit, however, the switch on
top of the Remote unit only offers two selectable modes:
Mode
Remote Access
(Computer A)
Local Access
(Computer B)

Keyboard Shortcut Command Sequences

Standard Hotkey
[Ctrl] - [Ctrl] - [T]
[Ctrl] - [Ctrl] - [Esc]
[Ctrl] - [Ctrl] - [Alt]+[E]
Instruction Manual
Local
'A' Indicator
ON
OFF
Hotkey with
Compatibility Mode
[Ctrl] - [Ctrl] - [T]
[Ctrl] - [Ctrl] - [Esc]
[Ctrl] - [Ctrl] - [Alt]+[E]
10
Remote
Description
Toggles console control
between Local Access and
Cancels the hotkey
Enables (2 beeps)
or disables (1beep)
Compatibility Mode so
that the KVM extender
will work with a KVM
switch that also uses a
[Ctrl] hotkey sequence
'B' Indicator
OFF
ON
Remote Access
sequence