Dascom DST-85 User Manual page 79

Dascom DST-85
Feeder Card Jam
Printer Card Jam
RFID_AUTH_ERR
OR
Call Support
Action: Do not turn off power. Refer to Section 2.2 to reload the
Ribbon. Press SET button to clear this warning and the Printer
will resume previous printing after initialization.
Pressing SET button as OLED display shown may eject jammed
card after initialization.
If the fault is not cleared after adjusting the lever, turn the
rollers manually to clear jammed card.
Do not turn off power. Open the front cover. Turn the rollers to
clear jammed card. Close the front cover. Press SET button to
clear this warning and the printer will resume previous printing
after initialization.
Check if genuine Ribbon is used. Next, check if the Ribbon has
an RFID tag. Press the SET button as the LCD shown to initialize
the Printer.
Check if genuine Ribbon is used. Next, check if the ribbon has
an RFID tag. Press SET button as the LCD shown to initialize the
printer.
65
User Guide V1.0