Dascom DST-85 User Manual page 20

Dascom DST-85
Under the following conditions images on cards may deteriorate or cards may
warp after printing:
• The surface of the card is in contact for an extended period with a vinyl card
holder or synthetic leather or other material that contains a plasticizer.
• The surface of the card is exposed to direct sunlight for an extended period.
• The card is repeatedly rubbed against a hard object such as a key.
• The faces of two cards are in contact for an extended period.
• The card is kept for an extended period in a very hot location such as a car
parked in the sun.
• The card is bent, or used with excessive force.
If a card with a magnetic strip is placed near a magnetic source, the data on the
strip could become corrupted.
Additionally, if an IC chip card is bent, or used with excessive force, the IC chip
may be damaged.
Warning: Operating this device in a residential environment may cause radio
interference.
6
User Guide V1.0