Dascom DST-85 User Manual page 19

Dascom DST-85
Handling
WARNING
The lower part of the Top Access Cover, the printer internal heat roller section, and
the thermal head section become very hot. Ensure you do not touch these three
locations.
• The cooling fan is always running for cooling inside the printer. This is not a
malfunction.
• Contact your reseller if there is a current leak.
• The printer may cause static, flickering or interrupt reception of televisions or
radios if they are too close to the printer.
• The lower part of cover top, internal heating platen and printer head may produce
high temperature, please don't touch these three parts.
connection of a ground wire is permitted.)
Telephone line ground wires or lightning conductors (danger of high current
flow in the event of a lightning strike.)
Be sure to turn off power and unplug the plug from electrical outlet before
moving the printer.
Pull on the plug or cable when unplugging it from an electrical outlet.
Do not use an under-rated extension cord.
Do not use flammable sprays near the printer.
Do not touch anything inside the printer unless specified in this manual.
Do not place heavy items on the printer and do not lean on the printer.
While the printer is operating, do not turn off the power, unplug the power
cable, or look inside (open) the printer.
5
User Guide V1.0