Esd Warning; Revision History - Connect Tech Lepton User Manual

ESD Warning

REVISION HISTORY

Revision Date
0.00 2024-04-29
Document: CTIM-00107
Revision: 0.00
ES France - Mobilité & Systèmes Embarqués
127 rue de Buzenval BP 26 - 92380 Garches
Electronic components and circuits are sensitive to
ElectroStatic Discharge (ESD). When handling any circuit
board assemblies including Connect Tech COM Express
carrier assemblies, it is recommended that ESD safety
precautions be observed. ESD safe best practices include,
but are not limited to:
•
Leaving circuit boards in their antistatic packaging
until they are ready to be installed.
•
Using a grounded wrist strap when handling
circuit boards, at a minimum you should touch a
grounded metal object to dissipate any static
charge that may be present on you.
•
Only handling circuit boards in ESD safe areas,
which may include ESD floor and table mats, wrist
strap stations and ESD safe lab coats.
•
Avoiding handling circuit boards in carpeted
areas.
•
Try to handle the board by the edges, avoiding
contact with components.
Changes
Preliminary Release
Page 6 of 27
Tél. 01 47 95 99 80
Fax. 01 47 01 16 22
Lepton
Users Guide
www.connecttech.com
Date: 2024-04-29
e-mail : mse@es-france.com
Site Web : www.es-france.com